Cheap PriceList for Machine Saw - Hydraulic Angle Notching Machine – FIN CNC

Product Application Introduction

Send email to us

by SGS Group

Employees

299

R&D staffs

Patents

154

Software ownership (29)

Product Detail

Feedback (2)

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for Angle Steel Drilling, Band Saw For Steel, Boiler Drum Drilling Machine, Our merchandise are widely recognized and dependable by users and can meet continuously building economic and social needs.

Cheap PriceList for Machine Saw - Hydraulic Angle Notching Machine – FIN CNC Detail:

Product Parameters

No.	Item	Parameter
No.	Item	ACH140	ACH200
1	Nominal force	560 KN	1000KN
2	Rated pressure of hydraulic system	22Mpa
3	Number of no-load running	20 times/min
4	Single blade cutting	14014016mm (material Q235-A, Max. Tensile Strengthσb≈410MPa)	20020020mm (material Q235-A, Max. Tensile Strengthσb≈410MPa)
5		14014014mm (material 16Mn, Max. Tensile Strengthσb≈600MPa)
6		14014012mm (material Q420, Max. Tensile Strengthσb≈680MPa)	20020016mm (material Q420, Max. Tensile Strengthσb≈680MPa)
7	Shearing angle	0°~45°
8	Maximum cutting length	200 mm	300mm
9	Square angle cutting	14014012mm(Q235-A, Maximum tensile strengthσb≈410MPa)	20020016mm(Q235-A, Maximum tensile strengthσb≈410MPa)
10	Square angle cutting	14014010mm(16Mn, Maximum tensile strengthσb≈600MPa)	20020012mm(16Mn, Maximum tensile strengthσb≈600MPa)
11	Ambient temperature	0℃~40℃
12	Motor power of hydraulic pump	15KW	18.5KW
13	Machine overall size (LWH)	200011001850mm	263512002090MM
14	Machine weight	About 3000kg	About 6500kg

Details and advantages

This product is composed of a main machine, cutting mould, and a hydraulic station, and is equipped with an electrical system to fulfill angle cutting.
1. Main machine
The main machine is welded by steel plates in a C shape. The upper part is the oil cylinder, and the lower part is the working table, which provides support for the mould and meets the strength and rigidity requirements of the machine.
2. Mould
The mould part is guided by sliding rails, this structure bears large partial loads and has high guiding accuracy.
3. Hydraulic station
The hydraulic system is composed of oil tank, motor, high and low pressure pump, control valve, oil filter shearing cylinder, etc. It is the power source of shearing cylinder. The electromagnetic reversing valve, overflow valve, unloading valve, etc. are imported parts with reliable performance and long service life.

Product detail pictures:

Related Product Guide:

To be the stage of realizing dreams of our employees! To build a happier, far more united and far more specialist team! To reach a mutual profit of our customers, suppliers, the society and ourselves for Cheap PriceList for Machine Saw - Hydraulic Angle Notching Machine – FIN CNC , The product will supply to all over the world, such as: Ukraine, California, Muscat, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.

CNC Metal Cutting Machine

CNC Milling Machine Vertical

CNC Vertical Milling Machine

Hole Punching Machine

Machine Saw

Metal Sheet Punching Machine

Punching Machine

Saw Cutter Machine

Surface Milling Machine

Vertical Band Saw

Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.