2022 China New Design Angle Machine - SWZ1250C FINCM Structure Drilling H-Beam Processing Machine – FIN CNC

Product Application Introduction

Send email to us

by SGS Group

Employees

299

R&D staffs

Patents

154

Software ownership (29)

Product Detail

Feedback (2)

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Boiler Drilling, Vertical Drilling Machine CNC, Metal CNC Milling Machine, As an expert specialized within this field, we've been committed to solving any problem of high temperature protection for users.

2022 China New Design Angle Machine - SWZ1250C FINCM Structure Drilling H-Beam Processing Machine – FIN CNC Detail:

Product parameters

NO.	Parameter name			Unit	Parameter value	Remark
1	Section steel			mm	150×75~1250×600
2	Thickness			mm	≤80
3	Length			m	15m	Configure according to customer demand
4	Short material limit			mm	Automatic processing≥3000
4	Short material limit			mm	Manual processing：690～3000
6	Quantity				3
7	drill hole Range		Fixed side, mobile side	mm	￠12~￠26.5
7	drill hole Range		Intermediate unit	mm	￠12~￠33.5
9	Spindle speed			r/min	180~560
10	Change the card head quickly			/	Morse taper hole 3^#^、、4^#	Can change to 2^#
11	Axial stroke		Fixed side, mobile side	mm	140
11	Axial stroke		Intermediate unit	mm	240
12	Axial feed rate			mm/min	20~300
13	Moving distance	Each spindle is in the direction of workpiece length		mm	520
		Both sides of the spindle in the up and down direction		mm	35～570	From the lower plane of the workpiece
		The intermediate unit is in the direction of workpiece width		mm	45～1160	From the datum side
14	Compressed air + cutting fluid			/	/
15	Air pressure			Mpa	≥0.5
16	Error of adjacent hole spacing in hole group			mm	≤0.5
17	Feeding error within 10 m length			mm	≤1
18	Fuel tank capacity			L	50
19	Distance error of adjacent holes in hole group			mm	≤±0.5
20	Accuracy of adjacent feeding distance within 10 meters			mm	≤±1
21	Three phase asynchronous motor for spindle rotation			kW	4×3	Number of spindles 3
22	Intermediate unit X-axis servo motor			kW	0.85
23	Z-axis servo motor of intermediate unit			kW	1.3
24	Fixed side and mobile side X-axis servo motor			kW	0.85×2
25	Fixed side and mobile side Y-axis servo motor			kW	1.3×2
26	Moving carriage three phase asynchronous motor			kW	0.55
27	Over dimension			mm	About 4800×2400×3300
28	Weight			kg	About 7000

Details and advantages

Electrical system

1). PLC is used to control the positioning of each CNC axis, material detection and drilling and other machine actions. The PLC control system realizes high-speed processing and improves the response speed of the system.

2). The CNC feeding device (feeding trolley) adopts full closed loop control to ensure the feeding accuracy during long-distance feeding; other positioning CNC axes adopt semi-closed loop control to ensure the positioning accuracy and stability of the machine tool.

3). Real-time monitoring function.

4). A variety of material programming methods.

5). Graphic display function.

1. Three automatic control stroke drilling power heads are respectively installed on three NC slide blocks for horizontal and vertical drilling. The three drilling power heads can work independently or simultaneously.

2. The spindle speed of each drilling power head is controlled by frequency converter and stepless adjusted; the feed speed is stepless adjusted by speed regulating valve, which can be adjusted rapidly in a large range according to the material of material and diameter of drilling hole.

3. The material is fixed by hydraulic clamping mechanism.

部件2

4. The machine is equipped with the detection device of the width of the material and the height of the web, which can automatically compensate the machining error caused by the irregular outline of the material, and improve the machining accuracy.

5. The machine is equipped with an aerosol cooling system, which has the advantages of less coolant consumption, cost saving and less bit wear.

Key outsourced components

NO.	Name	Brand	Country
1	Linear guide rail	HIWIN/CSK	Taiwan (China)
2	Electromagnetic hydraulic valve	ATOS/YUKEN	Italy/Japan
3	Hydraulic pump	Justmark	Taiwan (China)
4	Servo motor	Panasonics	Japan
5	Servo driver	Panasonics	Japan
6	PLC	MITSUBISHI	Japan
7	Spray cooling pump	BIJUR	USA
8	Flexible extension nozzle	BIJUR	USA
9	Pneumatic solenoid valve	AIRTAC	Taiwan (China)
10	Centralized lubrication	HERG/BIJUR	Japan/USA
11	Computer	Lenovo	China

Note: The above is our fixed supplier. It’s subject to be replaced by same quality components of other brand if the above supplier can’t supply the components in case of any special matter

Product detail pictures:

Related Product Guide:

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for 2022 China New Design Angle Machine - SWZ1250C FINCM Structure Drilling H-Beam Processing Machine – FIN CNC , The product will supply to all over the world, such as: Rome, South Africa, Afghanistan, With the growing of the company, now our products sold and served at more than 15 countries around the world,such as Europe,North America,Middle-east,South America,Southern Asia and so on. As we bear in our mind that innovation is essential to our growth, new product development is constantly.Besides, Our flexible and efficient operation strategies,High quality products and competitive prices are exactly what our customers are looking for. Also a considerable service brings us good credit reputation.

Angle Bending

Angle Cut

Angle Machine

Angle Marking Machine

Steel Structure Industry

The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.