Welcome to our websites!

Hydraulic Angle Notching Machine

Product Application Introduction

Hydraulic angle notching machine is mainly used to cut the corners of angle profile.

It has simple and convenient operation, fast cutting speed and high processing efficiency.

Service and guarantee


  • products details photo1
  • products details photo2
  • products details photo3
  • products details photo4
by SGS Group
Employees
299
R&D staffs
45
Patents
154
Software ownership (29)

Product Detail

Product Process Control

Clients And Partners

Company Profile

Product Parameters

No. Item Parameter
ACH140 ACH200
1 Nominal force 560 KN 1000KN
2 Rated pressure of hydraulic system 22Mpa
3 Number of no-load running 20 times/min
4  
 
 
 
Single blade cutting
140*140*16mm
 (material Q235-A, Max. Tensile Strengthσb≈410MPa)
200*200*20mm
 (material Q235-A, Max. Tensile Strengthσb≈410MPa)
5 140*140*14mm
 (material 16Mn, Max. Tensile Strengthσb≈600MPa)
 
6 140*140*12mm
 (material Q420, Max. Tensile Strengthσb≈680MPa)
200*200*16mm
 (material Q420, Max. Tensile Strengthσb≈680MPa)
7 Shearing angle 0°~45°
8 Maximum cutting length 200 mm 300mm
9  
 
Square angle cutting
140*140*12mm(Q235-A, Maximum tensile strengthσb≈410MPa) 200*200*16mm(Q235-A, Maximum tensile strengthσb≈410MPa)
10 140*140*10mm(16Mn, Maximum tensile strengthσb≈600MPa) 200*200*12mm(16Mn, Maximum tensile strengthσb≈600MPa)
11 Ambient temperature 0℃~40℃
12 Motor power of hydraulic pump 15KW 18.5KW
13 Machine overall size
(L*W*H)
2000*1100*1850mm 2635*1200*2090MM
14 Machine weight About 3000kg About 6500kg

Details and advantages

This product is composed of a main machine, cutting mould, and a hydraulic station, and is equipped with an electrical system to fulfill angle cutting.
1. Main machine
The main machine is welded by steel plates in a C shape. The upper part is the oil cylinder, and the lower part is the working table, which provides support for the mould and meets the strength and rigidity requirements of the machine.
2. Mould
The mould part is guided by sliding rails, this structure bears large partial loads and has high guiding accuracy.
3. Hydraulic station
The hydraulic system is composed of oil tank, motor, high and low pressure pump, control valve, oil filter shearing cylinder, etc. It is the power source of shearing cylinder. The electromagnetic reversing valve, overflow valve, unloading valve, etc. are imported parts with reliable performance and long service life.


  • Previous:
  • Next:

  • Product Process Control003

    4Clients And Partners001

    4Clients And Partners

    Company Brief Profile

    company profile photo1

    Factory Information

    company profile photo2

    Annual Production Capacity

    company profile photo03

    Trade Ability

    company profile photo4

    Write your message here and send it to us