PLD7030-2 Gantry Mobile CNC Plate Drilling Machine
| Maximum plate size | Length x width | 7000ｘ3000mm |
| Thickness | 200mm | |
| Work table | T-groove size | 22mm |
| Drilling power head | Quantity | 2 |
| Drilling hole diameter range | Φ12-Φ50mm | |
| RPM(variable frequency) | 120-560r/min | |
| Morse taper of spindle | No.4 | |
| Spindle motor power | 2X7.5kW | |
| Gantry longitudinal movement (x-axis) | X-axis stroke | 10000mm |
| X-axis moving speed | 0-8m/min | |
| X-axis servo motor power | 2ｘ2.0kW | |
|
Lateral movement of power head (Y-axis) |
Travel Y-axis | 3000mm |
| Y-axis moving speed | 0-8m/min | |
| Y-axis servo motor power | 2X1.5kW | |
|
Power head feed motion (Z axis) |
Z-axis stroke | 350mm |
| Z-axis feed rate | 0-4000mm/min | |
| Z-axis servo motor power | 2X1.5kW | |
| Chip conveyor and cooling | Chip conveyor motor power | 0.75kW |
| Cooling pump motor power | 0.45kW | |
| Electrical system | Control system | PLC + upper computer |
| Number of CNC axes | 4 |
1. The coordinate position of the hole can be positing quickly at the speed of 8m/min, and the auxiliary time is relatively short.
2. The machine is equipped with servo feed sliding table type drilling power head. The spindle motor of the drilling power head adopts stepless variable frequency speed regulation, and the feed speed adopts servo stepless speed regulation, which is convenient for operation.
3. After the drilling feed stroke is set, it has automatic control function.
4. The taper hole of the spindle is Morse No.4 and equipped with Morse no.4/3 reducing sleeve, which can be used to install drill bits with different diameters.
5. The gantry mobile structure is adopted, the machine covers a small area and the structure layout is reasonable.
6. The X-axis movement of the gantry is guided by two high bearing capacity linear rolling guide pairs, which is flexible.
7. The Y-axis movement of the power head sliding seat is guided by two linear rolling guide pairs, and driven by AC servo motor and precision ball screw pair, which ensures the high precision of drilling position.
9. The machine is equipped with spring center tool setting device, which can easily determine the position of flange.
10. It is equipped with chip remover and coolant tank. A cooling pump circulates the coolant for spindle drilling to improve the drilling performance and service life of the drill．
11. The control program adopts PLC and is equipped with upper computer to facilitate the storage and input of plate processing program, and the operation is simple. The software platform is window system, with friendly operation interface, clear and effective resource management, and powerful programming function; the plate size can be input by keyboard manually or input by U-disk interface.
|
NO. |
Name |
Brand |
Country |
|
1 |
Linear guide rail |
HIWIN/CSK |
Taiwan, China |
|
2 |
PLC |
Mitsubishi |
Japan |
|
3 |
Servo motor and driver |
Mitsubishi |
Japan |
|
4 |
Drag chain |
JFLO |
China |
|
5 |
Button, indicator light |
Schneider |
France |
|
6 |
Ball screw |
PMI |
Taiwan, China |
Note: The above is our standard supplier. It's subject to be replaced by same quality components of other brand if the above supplier can't supply the components in case of any special matter.
Company Brief Profile 
Factory Information 
Annual Production Capacity 
Trade Ability 
